injection moulding setter jobs in Ethekwini

Advanced Injection Moulding Certification 3-5 years proven injection and blow moulding setting experience The successful candidate will be required to use advanced setting skills to set injection and blow moulding machines ensuring optimum production output and reduction of scrap. Job Type: Full-time Experience: - blow moulding setting: 2 years (Required) - injection moulding setting: 3...

1.MACHINES SHOULD NOT BE LEFT UNATTENDED. 2.OPERATORS ARE RESPONSIBLE FOR MAKING SURE THE WORKSTATION IS CLEAN.3.KNOWLEDGE OF INJECTION MOULDING MACHINES4.OPERATOR TO PLACE REJECTS ASIDE IN REJECT BIN.5.OPERATORS ARE TO OPERATE MACHINE ACCORDING TO SUPERVISORS INSTRUCTION. 6.OPERATORS ARE TO PROPERLY TRIM AND PACK THE PRODUCTS AS PRODUCT INSPECTION INSTRUCTION AND “FIRST OFF SAMPLE”. 7.IF THERE...

Overview Hire Resolve’s client in the Packaging Industry is urgently seeking the expertise of an experienced Mould Setter to join their team in KwaZulu-Natal. Responsibilities: Managing all mould changes throughout the plant Setting machines according to the best practices Conducting mould and material trials as required Reporting and assisting with machine and mould maintenance requirements....

Overview (Area:) Pinetown (Salary:) Market Related (Ref: AG) Our national client requires and experienced and qualified Blow Moulding Setter. Must have Grade 12 with an NQF Level 4 Plastic Manufacturing qualification and a minimum of 2 years’ experience in a plastic manufacturing environment with good problem solving ability and knowledge of plastic blow moulding production processes...

A well-established FMCG manufacturing company is looking for an experienced Mould Store Controller with strong mould maintenance and store control expertise to ensure mould availability, reliability, and compliance with production requirements. Responsibilities: - Perform minor mould servicing, including replacement of pins, bushes, O-rings, gaskets, sandblasting, and minor repairs. - Clean,...

Our client is based in Pinetown and is seeking a Setter. Requirements: - Minimum N4 certificate is essential - Mechanical or Electrical aptitude - At least 3 years experience in a FMCG production environment - Being exposed to blow moulding is advantageous - Setting and/or Mechanical experience is advantageous - Must be able to work shifts - Have own transport is essential Basic salary R18...

Minimum Requirements: - Must have a minimum of 5 years experience as a Qualified Toolmaker in a Plastics Manufacturing or Injection Moulding industry - Red Seal Trade Test | Relevant Tertiary Education required - Proficient in CAD CAM essential - Strong knowledge of CNC machining | Mould fabrication | Maintenance and GD and T will be beneficial - Valid Driver's License and own Transport...

Senior Electronics Hardware Design Engineer KZN (near Pinetown) Requirements: - National Diploma or BSc or BEng in Electronic Engineering - Minimum of 10 years’ experience - Knowledge of the automotive industry - CE approval experience - Basic firmware experience for 8 and 32-bit microprocessors - Simulation of circuits using PSpice - Experience with Audio/Video streams Responsibilities: -...

Job Description One of our clients in Durban is looking for a Product Engineer to join their automotive component manufacturing company! Requirements include: •BSc/BTech/National Diploma in Mechanical Engineering •Minimum of 3 years vehicle automotive experience •Project Management experience •Design and drawing experience •Minimum of 5 years injection moulding process set up...

Job Description Designing and manufacturing tools, jigs and dies. Troubleshooting tooling issues. Modifying and repairing existing tools, jigs and dies. Constructing and repairing dies for plastic injection molding and pressings. Designing and manufacturing jigs and fixtures Updating tooling records Qualification & Skills Strong knowledge of tool design and manufacturing Knowledge of...

Senior Electronics Hardware Design Engineer KZN (near Pinetown) Requirements: National Diploma or BSc or BEng in Electronic Engineering Minimum of 10 yearsâ experience Knowledge of the automotive industry CE approval experience Basic firmware experience for 8 and 32-bit microprocessors Simulation of circuits using PSpice Experience with Audio/Video streams Responsibilities: Schematic Design  PCB...

Minimum Requirement: - N3 (mechanical or electrical) as a minimum but N4 or higher is essential - Mechanical/Technical aptitude - At least 3 years work experience in production and/or manufacturing(FMCG or similar) - Experience in setup of labellers and cameras is essential - Exposure to Injection or blow moulding is advantageous - Setting and/or Mechanical experience in production is...

Job Description Designing and manufacturing tools, jigs and dies. Troubleshooting tooling issues. Modifying and repairing existing tools, jigs and dies. Constructing and repairing dies for plastic injection molding and pressings. Designing and manufacturing jigs and fixtures Updating tooling records Qualification & Skills Strong knowledge of tool design and manufacturing 5 Years...

Overview A leading automotive component manufacturer situated in KwaZulu-Natal is urgently seeking the expertise of an experienced Assembly Product Engineer (Night Shift) to join their team. The successful incumbent for this position will be responsible for: Develop new products in line with customers and licensor specifications. Provide injection moulding and polymer processing expertise for...

Job Description One of our clients in Durban is looking for a Tool Designer to join their manufacturing company! Requirements include: •Certificate in Mechanical Engineering/Tool Making •Certificate in Computer Aided Manufacturing (CAM) •Certificate in Computer Aided Draughting/Design (CADD) •Minimum of 3 years experience •Sound knowledge of Tool Design and Manufacturing (Injection...

Minimum Requirements: - Must have a minimum of 3 years experience as a Toolroom Assistant in a Plastics Manufacturing or Injection Moulding industry - Relevant Tertiary Education required - Proficient in CAD CAM essential - Strong knowledge of CNC machining | Mould fabrication | Maintenance and GD and T will be beneficial - Valid Driver's License and own Transport required - Contactable...

A dynamic manufacturing company is looking for an experienced Shift Setter with a strong technical background to join their production team. The successful candidate will be responsible for the setup and mechanical maintenance of machinery within a fast-paced environment. Responsibilities: - Perform machine setting and technical adjustments to ensure optimal production output. - Conduct...

Job Description If you have experience working in the packaging Industry and if you meet all the below requirements, then this position is for you. Requirements include: •Trade Tested Toolmaker •CNC Milling •Cylindrical Grinding •Injection Moulding •Injection Blow Moulding •Minimum 2 years in packaging industry Correspondence will only be conducted with short listed candidates. Should...

Overview Hire Resolve’s client in the Package Manufacturing industry is urgently seeking the expertise of an experienced Production Specialist to join their team in KwaZulu-Natal. Responsibilities: Ensuring that all downstream processes are functioning correctly. Ensure that equipment is maintained to a high standard to delivery required output. Drive continuous improvement to improve overall...

Job Description There is an exciting opportunity available for a Factory Manager at a well-established packaging manufacturing company, based in Durban. Requirements: •Degree in Production Management or Engineering •10 – 15 years’ experience in the packaging or food manufacturing industry •Sound knowledge of injection moulding Correspondence will only be conducted with short listed...