injection moulding supervisor jobs in Ethekwini

1.MACHINES SHOULD NOT BE LEFT UNATTENDED. 2.OPERATORS ARE RESPONSIBLE FOR MAKING SURE THE WORKSTATION IS CLEAN.3.KNOWLEDGE OF INJECTION MOULDING MACHINES4.OPERATOR TO PLACE REJECTS ASIDE IN REJECT BIN.5.OPERATORS ARE TO OPERATE MACHINE ACCORDING TO SUPERVISORS INSTRUCTION. 6.OPERATORS ARE TO PROPERLY TRIM AND PACK THE PRODUCTS AS PRODUCT INSPECTION INSTRUCTION AND “FIRST OFF SAMPLE”. 7.IF THERE...

Advanced Injection Moulding Certification 3-5 years proven injection and blow moulding setting experience The successful candidate will be required to use advanced setting skills to set injection and blow moulding machines ensuring optimum production output and reduction of scrap. Job Type: Full-time Experience: - blow moulding setting: 2 years (Required) - injection moulding setting: 3...

Overview Hire Resolve’s client in the Packaging Industry is urgently seeking the expertise of an experienced Mould Setter to join their team in KwaZulu-Natal. Responsibilities: Managing all mould changes throughout the plant Setting machines according to the best practices Conducting mould and material trials as required Reporting and assisting with machine and mould maintenance requirements....

A well-established FMCG manufacturing company is looking for an experienced Mould Store Controller with strong mould maintenance and store control expertise to ensure mould availability, reliability, and compliance with production requirements. Responsibilities: - Perform minor mould servicing, including replacement of pins, bushes, O-rings, gaskets, sandblasting, and minor repairs. - Clean,...

Minimum Requirement: - N3 (mechanical or electrical) as a minimum but N4 or higher is essential - Mechanical/Technical aptitude - At least 3 years work experience in production and/or manufacturing(FMCG or similar) - Experience in setup of labellers and cameras is essential - Exposure to Injection or blow moulding is advantageous - Setting and/or Mechanical experience in production is...

Our client, a leader in the automotive manufacturing industry is seeking a Production Supervisor to join their team based in Prospecton MINIMUM REQUIREMENTS - Matriculation (grade 12 school leaving certificate), with Maths & Science as subjects. National Diploma or Degree in Production Management - At least two 2 years’ supervisory experience in an Automotive manufacturing environment MAIN JOB...

Minimum Requirements: - Must have a minimum of 5 years experience as a Qualified Toolmaker in a Plastics Manufacturing or Injection Moulding industry - Red Seal Trade Test | Relevant Tertiary Education required - Proficient in CAD CAM essential - Strong knowledge of CNC machining | Mould fabrication | Maintenance and GD and T will be beneficial - Valid Driver's License and own Transport...

Senior Electronics Hardware Design Engineer KZN (near Pinetown) Requirements: - National Diploma or BSc or BEng in Electronic Engineering - Minimum of 10 years’ experience - Knowledge of the automotive industry - CE approval experience - Basic firmware experience for 8 and 32-bit microprocessors - Simulation of circuits using PSpice - Experience with Audio/Video streams Responsibilities: -...

Job Description One of our clients in Durban is looking for a Product Engineer to join their automotive component manufacturing company! Requirements include: •BSc/BTech/National Diploma in Mechanical Engineering •Minimum of 3 years vehicle automotive experience •Project Management experience •Design and drawing experience •Minimum of 5 years injection moulding process set up...

Job Description Designing and manufacturing tools, jigs and dies. Troubleshooting tooling issues. Modifying and repairing existing tools, jigs and dies. Constructing and repairing dies for plastic injection molding and pressings. Designing and manufacturing jigs and fixtures Updating tooling records Qualification & Skills Strong knowledge of tool design and manufacturing Knowledge of...

Senior Electronics Hardware Design Engineer KZN (near Pinetown) Requirements: National Diploma or BSc or BEng in Electronic Engineering Minimum of 10 yearsâ experience Knowledge of the automotive industry CE approval experience Basic firmware experience for 8 and 32-bit microprocessors Simulation of circuits using PSpice Experience with Audio/Video streams Responsibilities: Schematic Design  PCB...

Minimum Job Requirements: - Matric, with Maths & Science. - Training Certificate: Manufacturing and Assembly Operations Supervision. - Minimum 2 years supervisory experience in an Automotive manufacturing environment. Key Performance Areas: Report to the Production Manager: - Production Planning: - Schedule and monitor production activities. - Schedule and arrange changeovers according to the...

Minimum Requirements: Matriculation (grade 12 school leaving certificate), with maths & science as subjects. National Diploma or Degree in Production Management Experience: At least two 2 years’ supervisory experience in an Automotive manufacturing environment. Production Planning: Schedule and monitor Production activities Schedule and arrange changeovers according to the Production Plan...

Job Description Designing and manufacturing tools, jigs and dies. Troubleshooting tooling issues. Modifying and repairing existing tools, jigs and dies. Constructing and repairing dies for plastic injection molding and pressings. Designing and manufacturing jigs and fixtures Updating tooling records Qualification & Skills Strong knowledge of tool design and manufacturing 5 Years...

Overview Hire Resolve’s client in the Package Manufacturing industry is urgently seeking the expertise of an experienced Production Specialist to join their team in KwaZulu-Natal. Responsibilities: Ensuring that all downstream processes are functioning correctly. Ensure that equipment is maintained to a high standard to delivery required output. Drive continuous improvement to improve overall...

Job Description One of our clients in Durban is looking for a Tool Designer to join their manufacturing company! Requirements include: •Certificate in Mechanical Engineering/Tool Making •Certificate in Computer Aided Manufacturing (CAM) •Certificate in Computer Aided Draughting/Design (CADD) •Minimum of 3 years experience •Sound knowledge of Tool Design and Manufacturing (Injection...

Minimum Requirements: - Must have a minimum of 3 years experience as a Toolroom Assistant in a Plastics Manufacturing or Injection Moulding industry - Relevant Tertiary Education required - Proficient in CAD CAM essential - Strong knowledge of CNC machining | Mould fabrication | Maintenance and GD and T will be beneficial - Valid Driver's License and own Transport required - Contactable...

Job Description If you have experience working in the packaging Industry and if you meet all the below requirements, then this position is for you. Requirements include: •Trade Tested Toolmaker •CNC Milling •Cylindrical Grinding •Injection Moulding •Injection Blow Moulding •Minimum 2 years in packaging industry Correspondence will only be conducted with short listed candidates. Should...

Overview A leading automotive component manufacturer situated in KwaZulu-Natal is urgently seeking the expertise of an experienced Assembly Product Engineer (Night Shift) to join their team. The successful incumbent for this position will be responsible for: Develop new products in line with customers and licensor specifications. Provide injection moulding and polymer processing expertise for...

Job Description There is an exciting opportunity available for a Factory Manager at a well-established packaging manufacturing company, based in Durban. Requirements: •Degree in Production Management or Engineering •10 – 15 years’ experience in the packaging or food manufacturing industry •Sound knowledge of injection moulding Correspondence will only be conducted with short listed...